Your shopping cart is empty!
Categories
- PLC
- HMI
- Drive
- Sensor
- IPC
- IGBT
-
PLC,HMI Cable
- - Allen- Bradley PLC Programming cable
- - OMRON PLC Programming cable
- - Proface PLC Programming cable
- - Schneider PLC Programming cable
- - SIEMENS Programming Cable
- - GE FANUC PLC Programming Cable
- - Hitachi PLC Programming Cable
- - IDEC PLC programming cable
- - MITSUBISHI PLC Programming Cable
- - VIGOR PLC programming cable
- - Panasonnic NAIS PLC Programming Cable
- - FUJI PLC Programming Cable
- - Delta PLC Programming Cable
- - EVIEW,WEINVIEW,EASYVIEW HMI Programming Cable
- - Kinco HMI download cable
- - LG PLC Programming Cable
- - MCGS HMI download cable
- - T-VERTER PLC Programming Cable
- - Emerson PLC Programming Cable
- - KOYO9 PLC programming cable
- - Hakko Touch Panel PLC
- - KEYENCE PLC programming cable
- - Cheap programming cable
-
Touch Glass, Membrane
- - SIEMENS HMI Touch Glass
- - SIEMENS Protective Film,Membrance
- - SIEMENS HMI Keypad
- - OMRON HMI Touch Glass
- - OMRON HMI Protective Film,Membrance
- - MITSUBISHI HMI Touch Glass
- - MITSUBISHI Protective Film,Membrance
- - FUJI Touch Glass
- - FUJI Protective Film,Membrance
- - FUJISTU HMI Touch Glass
- - Pro-face HMI Touch Glass
- - Pro-face Protective Film,Membrance
- - HAKKO HMI Touch Glass
- - HAKKO Protective Film Membrance
- - Delta HMI Touch Glass
- - HITECH HMI Touch Glass
- - PATLITE HMI Touch Glass
- - PATLITE HMI Protective Film Membrance
- - Nissei HMI Touch Glass
- - Panasonic HMI Touch Glass
- - Panasonic Protective Film Membrance
- - Koyo HMI Touch Glass
- - IDEC HMI Touch Glass
- - Schneider HMI Touch Glass
- - Allen Bradley PanelView Plus Touch Glass
- - Allen Bradley PanelView Plus Keypad
- - Allen Bradley PanelView Plus Protective Film Membrance
- - Allen Bradley PanelView Keypad
- - Allen Bradley PanelView Touch Glass
- - Allen Bradley PanelView Protective Film Membrance
- OEM S7-200/300 PLC
- Servo Cable
- Source code
- Fieldbus
USB-CIF31:USB to RS232 adapter(standard DTE interface) with LED
USB-CIF31:USB to RS232 adapter(standard DTE interface) with LED
Convert cable from USB to RS232(standard DTE interface).1 meter,with communication indicator,support traditional RS232 PLC prgramming cables.
Summary:
USB-CIF31 is the real USB to RS232 interface converters. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.
The RS232 ports of the USB-CIF31 are standard DTE interface (DB9M-Block, the same with the computer's serial port RS232). Its signal as shown below：
|
Pin |
signal |
Description |
|
1 |
DCD |
Carrier signal |
|
2 |
RXD |
Receive data |
|
3 |
TXD |
Sent data |
|
4 |
DTR |
Data ready |
|
5 |
GND |
Signal GND |
|
6 |
DSR |
MODEM ready |
|
7 |
RTS |
request |
|
8 |
CTS |
clean |
|
9 |
RI |
Ringing signal |
USB-CIF31 do a very good simulation as a RS232 serial port, and even direct operate hardware by I/O. for the user，just like to visit the physical RS232 ports. USB-CIF31 can be used to support majority of the traditional PLC cable programming, and this point is different from similar products on the market .the appendix will show the test results of the USB-CIF31 connection with various traditional RS232 interfaces with PLC programming cable communications.
Features and technological index:
● the operating system can support of the USB-CIF31 : Windows2000/XP (WinNT4/95/98/Me/DOS does not support)
● fully compatible with USB V1.1 and norms of USB CDC V1.1
● USB bus powered, the current consumption is about 50 mA
● baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● support UART data format: data bits: 7-8, stop bit: 1, 2, check-bit: odd / even / no parity
● each PC only support a USB-CIF31
● temperature: -20 ~ +75 ℃
● Cable length: 1 m, colors: black
Usage：
USB device drivers should be installed before using USB-CIF31 programming cable, which are available on the CD-ROM sold together with the cable. And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.
After completing Driver installation, the corresponding COM port for the USB-CIF31 programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces..
Appendix：
the success test data of the USB-CIF31 connecting with the traditional PLC programming cable (Win2000/XP operating system)
|
PLC |
Traditional cable programming |
Programming software version |
|
Mitsubishi FX series |
SC-09 |
FXGP/WIN V1.0、GPP V4.0、GX-Developer |
|
Mitsubishi A series |
SC-09 |
GPP V4.0、GX Developer |
|
Fujitsu NB0 |
NN-CNV3 |
Flex V1.0 |
|
Matsushita FP0, FP1, FP3 |
AFP8550/8513 |
FPSOFT V1.1 |
|
Omron PLC |
FS-CIF02和XW2Z-200S |
CX-Programmer V1.2 |
|
Siemens LOGO！ |
PC-CABLE |
LOGO! Soft V4.0 |
|
SiemensS7-200 |
PC/PPI |
STEP7 Micro/WIN V4.0 |
|
Siemens S7-300 |
PC/MPI |
STEP7 V5.3 |
|
GE 90-30 series PLC |
IC690ACC901 |
CIMPLICITY ME V5.0 |
|
Delta DVP Series PLC |
DVPACAB230 |
WPLSoft V2.03 |
|
A-B SLC Series |
1747-PIC |
FPSOFT V1.0 |
The quality is guaranteed.It's tested before shippment.Not made by Omron,OEM product as the replacement.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: